192.168.1.1

192-168-i-i

Router IP Address - Username and Password Default

  • IP Address
  • Brands
  • How to
  • Home
  • How to

How to Setting Up Belkin Router by Using Web – Based Dashboard

Belkin router dashboard is one of the first places to pop in mind when a Belkin router owner encounters troubleshooting errors. But in fact, there is more to discover in this front page setting, such as extending the modem usage. But not everyone knows for sure how to work out such processes.

Or on the other end of the spectrum, many people are having difficulty gaining access to this Belkin router dashboard, let alone advance any of the console’s applications.

Whatever case you’re caught up in, follow our digestible guides below to understand how to solve your problems.

How Do I Set Up A Belkin Router/ Modem Router Using The Dashboard

Once having your computer wired to the Ethernet, a valid IP address, a username, and a password, you’re ready to set up your Belkin router. Apply these steps:

Step 1: Detach the modem from the power outlet.

Detach the modem from the power outlet

Step 2: Attach the Ethernet cable from the modem to the WAN/internet port of the router.

Attach the Ethernet cable

Step 3: Plug both the router and the modem into the power outlet.

Plug both the router and the modem

Step 4: Secure your computer to an Ethernet port of the Belkin router.

 

Step 5: Start your web browser, such as Google Chrome. Then enter your computer’s IP into the address bar.

acces weh browser

 

This IP address is the one you’ve checked before. Swipe up at the second section to have a look at it again.

Step 6: Click “Detect my connection”. This may take a few minutes varied with your connection.

Detect my connection

NOTE: You may be required to restart your modem or enter a username and password if your Internet Service Provider (ISP) needs it. Revisit the last section for better instructions.

Step 7: The router will check if a new firmware is available.

If a devised update is available, just check the License Agreement. Click on Install update. Then wait for some minutes, so that the firmware will finish the downloading process.

check if a new firmware is available

Step 8: Enter your router’s network name, password, and your preferred “Security type”. Then hit Save and continue if you’ve finished.

router's network name and password

Step 9: Notice that there will be some random information appearing on the screen. Write the username and password down. They will be used to connect wireless devices and networks. Then, click “Great, what’s next?”

connect wireless devices and networks

Step 10: Register your router by filling out the fields given. Click Complete Registration once done.

Complete Registration

Step 11: Hit the button “Thanks, take me to the dashboard”

Thanks, take me to the dashboard

Then you shall be averted back to the main dashboard whereby you can make changes to the computer settings.

You have successfully set up your computer.

What Is A Belkin Router?

To better understand what a Belkin router is, let’s find out how a router functions in general.

Generally speaking, a router is a physical/ virtual appliance that allows for the process of transmitting information between computer networks, and oftentimes to the Internet.

Belkin router is no exception – a physical device that enables your computer to go online and share information with other electronic devices.

Just a side fact here, for quite a while, Belkin router prides itself on being a reliable choice for many households, thanks to its affordability, excellent performance, and durability. Yet it’s only true if you know for sure how to get the most out of this router, which we’ll be showing you right away.

How Do I Access My Belkin Router Dashboard?

As we’ve mentioned, accessing the setup page, is a crucial step, from which you can customize and advance the default settings to better manage the network and fix certain network problems.

Keep in mind that in order for the steps to work effectively, the router has to be powered ON, and the computer has been connected to either the LAN or Ethernet ports.

Here is our step-by-step guide on how to gain access to the dashboard.

Step 1: Double left-click on a web browser.
This web browser might be Chrome, Firefox, or Internet Explorer.

Step 2: Enter “https://router” or the router’s default IP address, 192.68.2.1 in the address bar, then hit [Enter]. Then the front page should display.

If it doesn’t work, which means you have changed your IP address, scroll below to the next section for better demonstrations.

Step 3: The front page will require you to log in to the admin’s account with a password.

For Dashboard users, you will be similarly asked to submit the password which was created upon setup.

Step 4: One of the three cases may happen:

If you do have a password, fill it in the given field and hit “Submit” or “Let me in”.In case you don’t have a password, leave it blank and click “Submit” or “Let me in” to proceed.But if you have forgotten the password, you may need to reset your router to default factory settings. Bear in mind that this process might involve the deletion of your previously saved settings. Move on to the third section to know how to reset your Belkin router to factory defaults.

Step 5: The front page displays.If either of these images displays on your screen, you have successfully accessed the front page. From then on, feel free to configure your computer settings.

How To Check My Belkin Router’s IP Address

The gist of giving a check on your IP settings makes sure that you know the valid IP to enter in the address bar. This process might vary from computers to computers based on the operating system you’re using.

Windows 10

Step 1: On the Taskbar, click on the Search icon and type ‘cmd’ in the given field.

Step 2: Choose Command Prompt.

Step 3: On the same window of Command Prompt, enter “ipconfig/all” and press the key [Enter].

Step 4: You should see your computer’s IP address displayed on the row Default Gateway.

Windows 8

Step 1: Click on the Search icon on the Charms bar.

NOTE: Swipe from right to left with touch-enabled computers.

Step 2: Click Command Prompt.

Then repeat Step 3 and Step 4 as demonstrated with Windows 10.

Windows 7/ Windows Vista

Step 1: Hit the Pearl button. Then type “cmd” in the white field.Step 2: Click on the cmd icon.

Step 3 and Step 4: Repeat as above.

OS-X

Step 1: Click on the ”Apple icon and move down to System Preferences.”Step 2: Select “Network under System Preferences display“.

Step 3: Select Location -> Automatic -> Ethernet. Then, your IP address should be displayed on the Router row.

How To Renew Your Belkin Router’s IP Address?

In the best interest of extra-protection for your virtual security and privacy, you can try changing the IP address of your router.

We mean, the manufacturer sets the IP address odd 192.168.0.1 by default on your device. Yet by making some change to it, it’d somehow deter hackers from illegally penetrating your computer because it is more challenging this way.

Watch how it’s done.

Step 1: Log in to your router. Open the router and enter the router’s default IP address that you just learned to check in the second section. Then fill in the username and password to access your router settings page.

Step 2: Open setup tab. It can be typically found at Settings => Network Configuration => Setup.

Step 3: Change the IP address. Be sure to have a notebook at hand to record the figures when you make any modifications to the IP address. The IP address will be used again and again to log in to your Settings.

A basic IP address will look like this: X.X.X.X, whereby the first two parts are fixed as a certain network ID, and the others flexible as the host ID. Making change to the ID means making change to the last half of the original ID, using numbers no more than 254.

For example, 192.168.100.01 can be changed to 192.168.239.1.

Step 4: Save the change and reboot your router. After finishing the last step, hit “Apply”, wait for some time to let your router reboot. Then try logging in to your router with the new IP address.

How To Master Reset Your Belkin Router?

By master reset, we mean reset to factory settings.

Using the physical reset button

Step 1: Make sure the router is powered ON, find the RESET button on your router, then squeeze and hold it for about 15 seconds.Step 2: Wait for another one minute for the router to restart. After that, your router is reset to default factory settings.

Using the Belkin router dashboard

Step 1: Access a web browser, type “https://router”, or the default IP address 192.168.2.1 on the Address Bar. Then, press the [Enter] key.

Step 2: Select Advanced Settings on your router’s dashboard.Step 3: Click “Restore Factory Default” under Utilities section.

Step 4: Click “Restore Default”.

Step 5: Click OK on both the small warning window and the next prompt.

Wait 60 seconds for the restoring process to be complete. Remember not to unplug the router throughout the process.

And then you have it!

How Can I Gain Access To Remote Management Feature Via The Router’s Dashboard?

Let’s have an abstract recap here. Considering a typical home network which assigns a public IP to the Belkin router. Then, the router again assigns different local IP addresses to different devices that have connected to the Internet, say, your smartphones or tablets.

And here comes the interesting parts. You can get access to and even better manage the configuration settings via your smartphones or tablets. This process can run the risk of privacy exposure, so please consider carefully or use incognito.

Follow our detailed steps:

Step 1: On your computer, launch a web browser, say, Google Chrome. After that, enter “https://router” or its exact IP address into the address bar. Hit [Enter].

Step 2: The dashboard does not necessarily have a password by default. But if you do have an administrator account, complete the given fields. Then, hit the button Let me in! to approach the dashboard.

Step 3: On the dashboard front-page, select Advanced Settings, then find System Settings under Utilities section.

Step 4: A Remote Management section will pop up. Click on the ON radio button to enable remote management.

NOTE: The remote management feature is normally turned off for the purpose of security and privacy.

Step 5: Click to apply the modifications.

From then on, you can allow third-party devices with specific IP addresses to gain entrance to your router. Some people use port 8080 or another separate port for remote access.

Another method to access the Belkin router from a remote location can be simply broken down as follows.

Step 1: Open a web browser on the third computer. Then copy and paste “https://A.A.A.A:8080” in the Address Bar and press [Enter].Replace the As with the IP address of your router’s internet. 8080 is the port you have used for remote access.If you’re not sure about the IP address part, watch this tutorial for better instructions.

Step 2: A log-in screen will pop up. Then you only need to enter the password of your router and click OK.

And then you’re all done gaining access to the router from a third-party device.

Wrapping Up

These are the most commonly asked questions on the Belkin router dashboard. We genuinely hope this compilation article will be a reliable source of reference for you when you face any technical problems.

If you have any other unsolved puzzles, don’t be afraid to contact the manufacturer, or best, the one who had once set up your home network. And now, good luck with your experience.

Related Articles

  • How to Reset Belkin Router to Factory Default Settings?
  • Belkin Router Setup Page - How to Use It to Configure an Access Point?
  • Belkin Router IP Address - How to Change Make It Easy?
  • How to Get to Router Settings
  • 3COM Router Setup
  • Netgear Router Default Password
Recent Post
  • Sagemcom Default Login – Username, Password and IP Address
  • PRO-NETS Default Login – Username, Password and IP Address
  • Planex Default Login – Username, Password and IP Address
  • OvisLink Default Login – Username, Password and IP Address
  • Nexxt Solutions Default Login – Username, Password and IP Address
Popular Router IPs
  • 192.168.1.1
  • 192.168.8.1
  • 192.68.0.1
  • 192.168.49.1
  • 192.168.1.256
  • 192.168.l00.1
  • 192.168.0.254
  • 10.0.0.1
  • 192.168.0.1
  • 10.1.10.1
  • 192.168.254.254
  • 192.168.1.2
  • 10.0.0.0.1
  • 192.168.10.1
  • 192.168.1.0
  • 192.168.1.10
  • 192.168.100.1
  • 192.168.1.254
  • 192.168.1.2
  • 192.168.11.1
  • 192.168.2.1
  • 192.168.15.1
  • 192.168.1.128
  • 192.168.l.0.1
  • 192.168.1.254
  • 192.168.1.10
  • 192.168.l.8
  • 192.168.3.1
  • 192.168.l.254
  • 192.168.0.1
  • 192.168.0.50
  • 192.168.0.2
  • 192.168.I0.1
  • 192.168.10080
IP Address
192.168.1.1
192.168.0.1
192.168.1.0
192.168.2.1
10.0.0.1
192.168.0.254
192.168.l00.1

Copyright © 2020 by 192-168-i-i.com