192.168.1.6 IP address definitely is not a new conception. However, it may be strange if you don’t have any experience in this field.
By 192.168.1.6 IP address, you are capable of customizing your router, and also keeping it work smoothly. In this article, we will show all the intriguing things that might surprise you about this IP address.
Have you felt curious yet? Let’s check it out now.
- What Is 192.168.1.6 IP Address?
- IP history
- Type of IP address
- Type of 192.168.1.6 IP Address
- How To Know Your Router’s IP Address
- Access Your Router By 192.168.1.6 IP address
- Customize Your Router
What Is 192.168.1.6 IP Address?
We bet you have heard a lot about IP addresses, but how much do you know about 192.168.1.6 IP addresses?
Typically, the IP address is the Internet Protocol (IP) that is used for the numerous connections in the network. By IP address, all your devices such as phone, computer, fax, etc can be identified.
To put it simply, the IP address is similar to the mailbox where you send and receive parcels. For example, if you wanna send a letter to your lover, you need to leave your address and fill in exactly the destination, right?
That is the way this IP works. Of course, this process is more simple than sending a letter because it’s fast and automatic. If you find it interesting, let’s take a deeper look on the type and history below:
This ‘’Internet Protocol’’ term was first used in 1974 by computer scientists Vint Cerf and Bob Kahn. At this time, IP was used with TCP protocol ( Transmission Control Protocol) and known as TCP/IP.
More specifically, this protocol can pack information, then give and receive them following the correct address.
The first IP version is the IP V4 ( version 4) that was formally defined in 1981 by the Internet Engineering Task Force. Until 1995, because of the development of the internet and IP V4 becoming exhausted, IPV6 was born and standardized to RFC 2460 in 1998. As of 2020, V6 is over 30% in internet traffic.
Type of IP address
Depending on the user’s requirement, there are many types of IP’s that may confuse you. However, we try to make it as simple as possible to understand. Let’s take a look.
Public IP and Private IP
What is public and private IP? Is it the same?
The answer is no! They are totally different. Public IP is the address that uses the large bandwidth to connect within the outside network. It is usually assigned by the Internet Service Provider.
On the other hand, private IP has a narrower bandwidth that is used for home or personal networks. Besides, private IP is usually used for the defaults router.
IPV4 and IPV6
As we mentioned above, both V4 and V6 are the basic protocols of the network. So, what is the difference between them?
First, let’s talk about the oldest protocol-IP V4. This address uses 32-bit to code the data, which looks like EFG.HIJ.KMN.OPQ (126.96.36.199 for example).
Moreover, the maximum value of V4 is 232 (4,294,967,296), which means the maximum address space of this address is about 4.3 billion. It’s a huge number right? However, it is not enough space for the modern Internet.
That is the reason V6 was born to replace V4 protocol. The significant advantage of this type is it uses 128 bits to save an address. We bet you will be impressed with 128 bit’s storage capacity. With 2128 ( about 340 duodecillion) maximum addresses, IP v6 will be the perfect replacement in the future.
Type of 192.168.1.6 IP Address
We have already known about these types of IP, so what is the correct type of 192.168.1.6 IP Address?
It is the private one, which is used for home and small businesses, and for the router as the defaults, as well.
Besides, it still uses the V4 protocol and runs from 192.168.1.1 – 192.168.1.255 in C class. That is the reason this IP is common in the modern network. Also, if you connect to this network by computer, phone or tablet, your default IP is 192.168.1.255.
How To Know Your Router’s IP Address
Knowing correctly your IP does not only save your time but also helps you access the router admin page. Let’s find your answer here.
If you are a Windows user, it just takes a few clicks. We can quickly get the IP address by the Command and control panel.
Windows command basically is the command-line tool for typing commands without using the mouse to access many tasks quickly. This window was used for window DOS as the main interface, so you can see it looks outdated. However, it’s the fastest way to get your address.
- Press Windows+R to open the Command Prompt
- Type ipconfig and press Enter
- Scroll down and find your IP in the default gateway line.
In case you prefer the visual way, using the Control panel is another alternative. However, it’s a bit complicated. Follow us!
- At Start, searching for the ‘’Control panel’’ and hit Enter
- In the main window, find for the Network and Internet, then click on ‘’View network status and tasks’’.
- In the appeared window, hit the name of your network.
- Next, choose the ‘’ Details’’ button.
- Now, check for your address in the ‘’IPv4 Default Gateway”.
On MAC OS
Frankly speaking, finding the default gateway on MAC is pretty straightforward. Just a simple step.
- At the top of your screen, choose the “Apple” menu and pick ‘’System Preferences”
- In the ‘’System Preferences”, select ‘’Network’’
- Now, just choose your network and click on the ‘’advantage’’ button.
- Then, pick the “TCP/IP” that is on the right of the Wi-Fi tab and check your address in the router line.
Access Your Router By 192.168.1.6 IP address
Step 1: Go to 192.168.1.6
Don’t be mistaken 192.168.1.6 for 192.168.0.1. or any IP address, as the router admin can only be opened by the correct IP. Unless you type the exact address, all accessing efforts are impossible. So, be careful in this step.
One more thing, you can only enter this dashboard when your internet is available, thus ensure you have a secure connection before beginning.
Step 2: Fill the router account
Everything you need now is a login account, just fill into the username and password and press the OK button. What happens if you forget all of them? Relax, let’s get it back by following some tips below.
Try the defaults account
Typically, most brands use the same username and password for their device, thus you can try some common login such as ‘’admin’’ for both of them. Or, try the ‘’admin’’ for the username and leave the password blank.
The best way is to look for the router’s manual coming with the router. This way not only saves your time but also gives you some useful information about your network.
Use the third software
If you are unlucky with this method above, you can get back a login account by RouterPasswords.com page. This page seemingly keeps all login information of many brands in the world, it also regularly updates to collect all information thoroughly. It’s worth a try, right?
First, type RouterPasswords.com in the searching bar or access here. On the ‘’Select your router Manufacturer’’, select your router brand and press “find password”. Then, check your login information on the right table.
Congratulations, you have done your work. Once access to the router dashboard, you can do a lot of things with your router settings such as changing the admin information, altering the Wi-Fi password or simply updating the software. If you are wavering about any process above, let’s move to the next part to get your answer.
Customize Your Router
Change the admin account
As we mention above, most router brands use the same login account for their device, which easily becomes the target for bad intrusions. Therefore, changing your admin password is necessary to avoid any security problem.
- First, get back the router page by 192.168.1.6 address
- Login by the account you got above
- In the main windows page, pick the settings tab -> Change Router Password
- Fill the new password and click the SAVE button.
Be warned: The strong password will have at least eight characters long and include numbers, letters, and even special characters. This password is typically hard to remember, so don’t forget to write it down and use it for the next login.
Change the Wi-Fi account
Let’s imagine how frustrating it can be when your Wi-Fi runs slowly because of sharing the connection with too many users, and you have no idea how to fix that. Easy, change the Wi-Fi password!
- Like changing the admin account, you can only change the Wi-Fi information when accessing the router admin page.
- At the Wireless tab, select Wireless Security and click WPA/WPA2
- In the ‘’password’’ line, type your preferred password then choice Save option.
You may don’t know that the Wi-Fi password can easily be hacked in a few minutes. To keep your network safe and operate smoothly, you should frequently change the password once per month.
Update the Firmware
Finally, the firmware update must be taken into account when using any internet device. It not only allows your router to work smoothly, but also extends the life of the product. Let’s check it now!
- Back to the router page again by 192.168.1.6 address
- Find for the ADVANCED tab in the main display and select Administration or similar option.
- Press ‘’Check’’ button and waiting for checking process
- Select ‘’Yes’’ if it requires updating the firmware. On the other hand, if it doesn’t give you any requirements, your software now is the newest version.
- Finally, reboot the router to complete process
FAQs About 192.168.1.6
Why can’t I login into the router page?
Now, find the reset button in the back of your router. If you notice, the reset button is totally different from a reboot switch that is denoted by the RESET word.
- With something hard and small such as a paperclip, press it in 30 seconds or more.
- Keep holding until the light router changes.
Why can’t I connect to the network?
- Unplug the router from power or press the power button.
- Wait for 10 second
- Plug the device into power again and enjoy the result!
See! Nothing high-tech here. Login and customize your router becomes simpler than ever when you follow this step-by-step guide in this 192.168.1.6 IP article.
Besides, you should be careful when customizing the admin router information and write it down as soon as possible for the next login.
Finally, if you have any questions about the 192.168.1.6 IP address, leave it in the comment section below and don’t forget to share it with your friends.
Thanks for reading.